021 194 9138 Monday – Sunday, 24 Hours
Get a Free Quote
Designed in Christchurch, Installed by Christchurch Electricians

Evnex EV Charger Installation in Christchurch – The Local Smart Charger, From $1,674 Installed

Evnex chargers are designed and engineered right here in Christchurch — built for New Zealand homes, NZ wiring rules and NZ electricity plans, and backed by a local support team. We supply and install the full Evnex range, or fit an Evnex unit you already own for our flat $875 incl. GST installation labour.

  • E2 Flex from $1,674 incl. GST supplied & installed
  • NZ-based support and warranty — no offshore call centres
  • Solar tracking & night-rate scheduling configured at handover
  • Certificate of Compliance issued on every job
Get a Free Fixed Quote 021 194 9138
Evnex smart EV charger installed at a Christchurch home
Why Evnex

A Christchurch Charger for Christchurch Homes

Most EV chargers sold in New Zealand are designed for European or American markets and adapted later. Evnex went the other way: the company was founded in Christchurch and engineers its chargers specifically for New Zealand — our 230V single-phase homes, our wiring standards, our retailers’ night-rate windows, and our weather. When something needs support, you talk to people in this country, often in this city.

The hardware holds its own against any import: app-controlled scheduling, CT-based dynamic load management that protects your main fuse (often avoiding a switchboard upgrade), and real-time solar tracking on the E2 Plus and X-series that turns surplus rooftop generation into free kilometres — covered in depth on our solar & EV integration page.

The Evnex range, supplied & installed

ModelBest forInstalled (incl. GST)
E2 FlexThe value pick — 7.4kW smart charging with app scheduling$1,674
E2 CoreAdds dynamic load management for homes with busy switchboards$1,974
E2 PlusAdds real-time solar tracking — the pick for solar homes$2,274
X7Commercial-grade 7.4kW with OCPP — workplaces & rentals$2,470
X2222kW three-phase — fleets and commercial sites$2,574

Comparing brands? See how Evnex stacks up against the Wallbox Pulsar range, or view every charger we stock with installed prices on the EV charger cost page. Businesses looking at the X-series should start with our commercial EV charger installation page.

Installation

How Your Evnex Installation Works

  1. Photo quote. Send photos of your switchboard and preferred charger position — you receive a written, fixed, itemised quote, usually the same day.
  2. One-visit installation. Dedicated circuit, charger mounted and wired, CT clamp fitted for load management or solar tracking where the model supports it. Typically 3–5 hours.
  3. Configuration & handover. WiFi connected, the Evnex app set up on your phone, night-rate charging scheduled, live charge test with your car, Certificate of Compliance issued on the spot.

Every installation is completed by EWRB-registered electricians to AS/NZS 3000. Read the full process on our home EV charger installation page.

Evnex Questions

Evnex Installation FAQs

Supplied and installed: E2 Flex $1,674, E2 Core $1,974, E2 Plus $2,274, X7 $2,470, X22 $2,574 — all incl. GST, including our flat $875 installation labour (cable runs up to 10m), app setup and the Certificate of Compliance. Already own an Evnex? Installation is $875 incl. GST. Full details on the cost guide.

Three practical reasons: support staff in New Zealand who answer in your timezone; firmware and app features built around NZ retailers’ tariffs and metering; and a local company standing behind the warranty. When a charger will sit on your wall for ten years, those things end up mattering more than a small sticker-price difference.

No solar and a modern switchboard: E2 Flex. Older or busy switchboard: E2 Core — its load management usually beats paying for a board upgrade. Solar panels on the roof (or planned): E2 Plus. Business, rental or fleet: X7 or X22 with OCPP back-office control — see our commercial page. We’ll confirm the right fit when we quote.

Yes. Bring your own Evnex unit and we install it for the flat $875 incl. GST labour rate (cable runs up to 10m), including WiFi setup, app configuration, a live charge test and your Certificate of Compliance. Just tell us the model when you request a quote so we bring the right CT hardware.

Charge on a Charger Built in Your Own City

Evnex E2 from $1,674 installed · Fixed written quotes · EWRB-registered · CoC guaranteed. Call 021 194 9138 or request a free quote online.

Get a Free Quote 021 194 9138
Service Area

EV Charger Installation Service Areas – Christchurch & Canterbury

We install home EV chargers right across Christchurch, Selwyn, Waimakariri and Banks Peninsula. These are our main service areas — if your suburb isn’t listed, we almost certainly still cover it.

Don’t see your area? We service every Christchurch suburb and most of Canterbury — get in touch or browse EV chargers across Christchurch.