021 194 9138 Monday – Sunday, 24 Hours
Authorised Wallbox Installers – EWRB Registered

Wallbox EV Charger Installation in Christchurch – Pulsar Plus & Pulsar Max, Supplied & Installed

Wallbox’s Pulsar range is one of the world’s most popular home EV chargers — compact, fast and genuinely smart. We supply, install and configure Wallbox chargers across Christchurch and Canterbury, or fit a unit you’ve already bought for our flat $875 incl. GST installation labour.

  • Pulsar Plus from $2,250 incl. GST supplied & installed
  • Own your Wallbox already? $875 incl. GST install only
  • myWallbox app, scheduling & load management configured
  • Certificate of Compliance issued on every job
Wallbox EV charger installed on a Christchurch garage wall

Why Christchurch EV Owners Choose Wallbox

Wallbox is a European charger brand with a strong following in New Zealand, and for good reason. The Pulsar Plus packs 7.4kW charging into one of the smallest wall units on the market — barely bigger than your hand — with a tethered Type 2 cable that suits every modern EV sold here. Everything is controlled from the myWallbox app: schedule charging into your retailer’s cheap night window, monitor energy use, lock the charger against unauthorised use, and update firmware over WiFi.

Two features matter particularly for Christchurch homes. Power Boost dynamic load management measures your household draw through a CT meter and winds the charger up or down so you never trip your main supply — which is what lets many older homes avoid a switchboard upgrade entirely. And Eco-Smart solar charging diverts surplus generation from your panels into the car; if you have solar or plan to add it, see our solar & EV integration page for how that works.

Wallbox Pulsar Plus — $2,250–$2,570 installed

7.4kW single-phase, tethered Type 2 cable, WiFi + Bluetooth, myWallbox app, Power Boost load management (with meter), Eco-Smart solar modes. IP54 weatherproof — happy on a garage wall or under eaves. The best-value pick for most homes.

Wallbox Pulsar Max — ~$2,870 installed

Everything the Plus does, in a tougher IP55/IK10-rated enclosure with easier installer diagnostics. Choose the Max for fully exposed outdoor positions — fence posts, carports, and coastal properties from Sumner to New Brighton.

Not set on Wallbox? Compare it with Evnex — the Christchurch-designed alternative — or see every charger we stock with installed prices on our EV charger cost page.

How Your Wallbox Installation Works

  1. Photo quote. Send us photos of your switchboard and the spot you want the charger. You get a written, fixed, itemised quote — usually the same day.
  2. One-visit installation. We run a dedicated circuit, mount and wire the Pulsar, install the Power Boost meter if selected, and protect any outdoor cabling in conduit. Most jobs take 3–5 hours.
  3. Configuration & handover. We connect the charger to your WiFi, set up the myWallbox app on your phone, schedule night-rate charging, run a live charge test with your car, and issue your Certificate of Compliance.

Every installation is completed by EWRB-registered electricians to NZ wiring rules (AS/NZS 3000), and the CoC is yours to keep for insurance and resale. Read more about the process on our home EV charger installation page.

Wallbox Installation FAQs

Supplied and installed, a Pulsar Plus is $2,250–$2,570 incl. GST and a Pulsar Max around $2,870 incl. GST — including our flat $875 installation labour for cable runs up to 10m, all wiring, app configuration and the Certificate of Compliance. Already own a Wallbox? Installation is $875 incl. GST. Longer cable runs or switchboard work are itemised in your written quote first — see the full cost guide.

For a garage or sheltered wall, the Pulsar Plus does everything most homes need at the lower price. Choose the Pulsar Max when the charger will live fully exposed to the weather — its IP55/IK10 enclosure shrugs off rain, impacts and coastal air. Charging performance is identical at 7.4kW.

Yes — with the optional power meter fitted, Eco-Smart mode charges from your surplus solar, either blended with grid power or solar-only. We install the meter and configure the mode against your inverter during installation. If solar charging is your main priority, also look at the Zappi and Evnex options on our solar & EV page.

The tethered Type 2 cable fits every modern EV and PHEV sold new in New Zealand — Tesla, BYD, Hyundai, Kia, MG, Polestar, Toyota, Mitsubishi and more. Driving an older Japanese import with a Type 1 inlet? Tell us the model when you request your quote and we’ll recommend the right approach — see our Type 1 installation page.

Ready for a Wallbox on Your Wall?

Fixed written quotes · Pulsar Plus from $2,250 installed · EWRB-registered · CoC guaranteed. Call 021 194 9138 or request a free quote online.

EV Charger Installation Service Areas – Christchurch & Canterbury

We install home EV chargers right across Christchurch, Selwyn, Waimakariri and Banks Peninsula. These are our main service areas — if your suburb isn’t listed, we almost certainly still cover it.

Don’t see your area? We service every Christchurch suburb and most of Canterbury — get in touch or browse EV chargers across Christchurch.